模具英语亚博网址登陆怎么说
发布时间:2019-08-22 17:10

The mould is then covered to exclude dust .
然后将模具盖好,亚博app下载地址,以防尘埃。

This will reduce and equalize mold temperatures .
这样会降低和均衡模具温度。

It seems he is a tool-and-die maker .
他好像是个模具工人。

Mold temperature is controlled by water flow in cooling channels .
模具温度可用冷却槽中水的流动来控制。

Also the machine mold is up to the required temperature and is usually controlled by thermostat .
模具应达到所要求的温度而通常用恒温器控制。

In grid casting operations, mold spray application involves time when no grids are produced .
在板栅铸造过程中,给模具喷涂也占用时间,其间不生产板栅。

Multi-cavity molds are sometimes provided with knock-out pins for easy ejection of the casting from the molds .
多腔模具有时装有顶钉,以便铸件易于脱模。

All lead castings were produced at first by hand in many cases from single cavity molds .
起初所有的铅铸件都是手工生产的,亚博网址登陆,而且在许多情况下都是使用单腔模具。

Eight grid molds of the conventional design are mounted, equally spaced along the table top's circular edge .
八个普通结构的板栅模具,沿工作台顶部周边间隔相等。

Too much water reduces the adhesion and too little piles the material up too thick on the mold surface .
水太多会减少粘附力,加水太少则会使脱模剂在模具表面堆积太厚。